multipart/x-mixed-replace resourcesCertain actions cause the browsing context to navigate to a new resource. A user agent may provide various ways for the user to explicitly cause a browsing context to navigate, in addition to those defined in this specification.
For example, following a hyperlink,
form submission, and the window.open() and location.assign() methods can all cause a browsing context to
navigate.
A resource has a URL, but that might not be the only information necessary
to identify it. For example, a form submission that uses HTTP POST would also have the HTTP method
and payload. Similarly, an iframe srcdoc document needs to know the data it is to use.
Navigation always involves source browsing context, which is the browsing context which was responsible for starting the navigation.
As explained in issue #1130 the use of a browsing context as source might not be the correct architecture.
To navigate a browsing context browsingContext to a resource resource, optionally with an exceptions enabled flag, the user agent must run these steps:
If resource is a URL, then set resource to a new request whose url is resource.
If the source browsing context is not allowed to navigate browsingContext, then:
If the exceptions enabled flag is set, then throw a
"SecurityError" DOMException.
Otherwise, the user agent may instead offer to open resource in a new top-level browsing context or in the top-level browsing context of the source browsing context, at the user's option, in which case the user agent must navigate that designated top-level browsing context to resource as if the user had requested it independently.
Doing so, however, can be dangerous, as it means that the user is overriding the author's explicit request to sandbox the content.
If there is a preexisting attempt to navigate browsingContext, and the source browsing context is the same as browsingContext, and that attempt is currently running the unload a document algorithm, then abort these steps without affecting the preexisting attempt to navigate browsingContext.
If the prompt to unload algorithm is being run for the active document of browsingContext, then abort these steps without affecting the prompt to unload algorithm.
Cancel any preexisting but not yet mature
attempt to navigate browsingContext, including canceling any instances of the fetch algorithm started by those attempts. If one of those attempts
has already created and initialized a new
Document object, abort that
Document also. (Navigation attempts that have matured already have session history entries, and are
therefore handled during the update the session history with the new page algorithm,
later.)
Prompt to unload the active document of browsingContext. If the user refused to allow the document to be unloaded, then abort these steps.
If this instance of the navigation algorithm gets canceled while this step is running, the prompt to unload algorithm must nonetheless be run to completion.
Abort the active document of browsingContext.
If browsingContext is a nested browsing context, then put it in the
delaying load events mode.
The user agent must take this nested browsing context out of the delaying
load events mode when this navigation algorithm later matures, or when it terminates (whether due to having
run all the steps, or being canceled, or being aborted), whichever happens first.
Let navigationType be "form-submission" if the navigation algorithm was invoked as a result of the form submission algorithm, and "other"
otherwise.
Return to whatever algorithm invoked the navigation steps and continue running these steps in parallel.
This is the step that attempts to obtain resource, if necessary. Jump to the first appropriate substep:
Run process a navigate response with null, resource, navigationType, the source browsing context, and browsingContext, and then abort these steps.
javascript"Queue a task to run these
"javascript: URL" steps, associated with the active document
of browsingContext:
Let result be undefined, and jump to the step labeled process result below if either of the following are true:
The source browsing context's active document's origin is not the same origin as browsingContext's active document's origin.
As explained in issue #2591 this step does not work and presents a security issue.
The Should navigation request of type from source in target be blocked by
Content Security Policy? algorithm returns "Blocked" when
executed upon resource, "other", the source
browsing context, and browsingContext. [CSP]
Let urlString be the result of running the URL serializer on resource's url.
Remove the leading "javascript:" string from
urlString.
Let script source be the result of applying the percent decode algorithm to urlString.
Replace script source with the result of applying the UTF-8 decode algorithm to script source.
Let address be the URL of the active document of browsingContext.
Let settings be the relevant settings object for the active document of browsingContext.
Let base URL be settings object's API base URL.
Let script be the result of creating a classic script given script source, settings, base URL, and the default classic script fetch options.
Let result be the result of running the classic script script. If evaluation was unsuccessful, let result be undefined instead. (The result will also be undefined if scripting is disabled.)
Let response be null.
Process result: If Type(result) is not
String, then set response to a response whose status is 204.
Otherwise, set response a response
whose header list consists of `Content-Type`/`text/html` and `Referrer-Policy`/settings's referrer
policy, whose body is result,
and whose HTTPS state is
settings's HTTPS state.
The exact conversion between the JavaScript string result and the bytes that comprise a response body is not yet specified, pending further investigation into user agent behavior. See issue #1129.
When it comes time to set the document's address, use address as the override URL.
Run process a navigate response with resource, response, navigationType, the source browsing context, and browsingContext, and then abort these steps.
The task source for this task is the DOM manipulation task source.
So for example a javascript: URL in
an href attribute of an a element
would only be evaluated when the link was followed, while such a URL in the src attribute of an iframe element would be
evaluated in the context of the iframe's own nested browsing
context when the iframe is being set up; once evaluated, its return value
(if it was a string) would replace that browsing context's
Document, thus also changing the Window object of that
browsing context.
GET`, and there are
relevant application caches that are
identified by a URL with the same origin as the URL in question, and that have
this URL as one of their entries, excluding entries marked as foreign, and whose mode is fast, and the user agent is not in a mode where it
will avoid using application cachesFetch resource from the most appropriate application cache of those that match.
For example, imagine an HTML page with an associated application cache displaying an image and a form, where the image is also used by several other application caches. If the user right-clicks on the image and chooses "View Image", then the user agent could decide to show the image from any of those caches, but it is likely that the most useful cache for the user would be the one that was used for the aforementioned HTML page. On the other hand, if the user submits the form, and the form does a POST submission, then the user agent will not use an application cache at all; the submission will be made to the network.
This still needs to be integrated with the Fetch standard. [FETCH]
Run process a navigate fetch given resource, the source browsing context, and browsing context, and navigationType.
javascript" nor a fetch
schemeRun process a navigate URL scheme given resource's url and browsingContext.
To process a navigate fetch, given a request request, browsing context sourceBrowsingContext, browsing context browsingContext, and string navigationType, run these steps:
Let response be null.
Set request's client to
sourceBrowsingContext's active document's relevant settings
object, destination to "document", mode to "navigate", credentials
mode to "include", use-URL-credentials flag, redirect mode to "manual",
and target client id to
browsingContext's active document's relevant settings
object's id.
If browsingContext is a child browsing context and the browsing context container of browsingContext has a browsing context scope origin, then set request's origin to that browsing context scope origin.
Create a new environment reservedEnvironment, and set its id to a new unique opaque string, its creation URL to request's url, and its target browsing context to browsingContext.
The created environment's active service worker is set in the handle fetch algorithm during the fetch if its creation URL matches a service worker registration. [SW]
Set request's reserved client to reservedEnvironment.
If the Should navigation request of type from source in target be blocked by Content
Security Policy? algorithm returns "Blocked" when executed upon
request, navigationType, sourceBrowsingContext, and
browsingContext, then set response to a network error.
[CSP]
Otherwise:
Fetch request.
Wait for the task on the networking task source to process response and set response to the result.
Otherwise, if response has a location URL that is a URL whose scheme is "blob", "file", "filesystem", or "javascript", then set response to a network error.
Otherwise, if response has a location URL that is a URL whose scheme is a fetch scheme, then run process a navigate fetch with a new request whose url is response's location URL, sourceBrowsingContext, browsingContext, and navigationType.
Otherwise, if response has a location URL that is a URL, run the process a navigate URL scheme given response's location URL and browsingContext.
Fallback in prefer-online mode: If response was not fetched from
an application cache, and was to be fetched using `GET`, and
there are relevant application caches that are
identified by a URL with the same origin as the URL in question, and that have this
URL as one of their entries, excluding entries marked as foreign, and whose mode is prefer-online, and the user didn't cancel
the navigation attempt during the earlier step, and response is either a network
error or its status is not an ok
status, then:
Let candidate be the response identified by the URL in question from the most appropriate application cache of those that match.
If candidate is not marked as foreign, then the user agent must discard the failed load and instead continue along these steps using candidate as response. The user agent may indicate to the user that the original page load failed, and that the page used was a previously cached response.
Fallback for fallback entries: If response was not fetched from
an application cache, and was to be fetched using `GET`, and
its URL matches the fallback namespace
of one or more relevant application caches, and
the most appropriate application cache of those
that match does not have an entry in its online
safelist that has the same origin as response's URL and that is a
prefix match for response's URL, and the user didn't cancel the
navigation attempt during the earlier step, and response is either a network error or
its status is not an ok status,
then:
Let candidate be the fallback response specified for the fallback namespace in question. If multiple application caches match, the user agent must use the fallback of the most appropriate application cache of those that match.
If candidate is not marked as foreign, then the user agent must discard the failed load and instead continue along these steps using candidate as response. The document's URL, if appropriate, will still be the originally requested URL, not the fallback URL, but the user agent may indicate to the user that the original page load failed, that the page used was a fallback response, and what the URL of the fallback response actually is.
Run process a navigate response given request, response, navigationType, the source browsing context, browsingContext, and reservedEnvironment.
To process a navigate response, given null or a request request, a response response, a string navigationType, two browsing contexts source and browsingContext, and an optional environment reservedEnvironment, run these steps:
If any of the following are true, then display the inline
content with an appropriate error shown to the user, with the newly created
Document object's origin set to a new opaque origin, and abort these steps.
response is a network error.
TODO: Define X-Frame-Options
processing here [whatwg/html#1230].
The Should navigation response to navigation request of type from source in target
be blocked by Content Security Policy? algorithm returns "Blocked" when executed upon request, response,
navigationType, source, and browsingContext. [CSP]
This is where the network errors defined and propagated by the WHATWG Fetch standard, such as DNS or TLS errors, end up being displayed to users. [FETCH]
If response's status is
204 or 205, then abort these steps.
If response has an `Content-Disposition` header specifying the attachment disposition type, then handle it as a download and abort
these steps.
Let type be the computed type of response.
If the user agent has been configured to process resources of the given type using some mechanism other than rendering the content in a browsing context, then skip this step. Otherwise, if the type is one of the following types, jump to the appropriate entry in the following list, and process response as described there:
text/cache-manifest"text/css"text/plain"text/vtt"multipart/x-mixed-replace"An explicitly supported XML type is one for which the user agent is configured to
use an external application to render the content (either a plugin rendering
directly in browsingContext, or a separate application), or one for which the user
agent has dedicated processing rules (e.g. a Web browser with a built-in Atom feed viewer would
be said to explicitly support the application/atom+xml MIME type), or one for which
the user agent has a dedicated handler (e.g. one registered using registerContentHandler()).
The term JSON MIME type is used to refer to the MIME
types application/json, text/json, and any MIME
type whose subtype ends with the five characters "+json".
An explicitly supported JSON type is one for which the user agent is configured to
use an external application to render the content (either a plugin rendering
directly in browsingContext, or a separate application), or one for which the user
agent has dedicated processing rules, or one for which the user agent has a dedicated handler
(e.g. one registered using registerContentHandler()).
Setting the document's address: If there is no
override URL, then any Document created by these steps must have its
URL set to the URL that was
originally to be fetched, ignoring any other data that was used to obtain the resource. However,
if there is an override URL, then any Document created by
these steps must have its URL set to that
URL instead.
An override URL is set when dereferencing a javascript: URL and when
performing an overridden reload.
Initializing a new Document object: when a
Document is created as part of the above steps, the user agent will be required to
additionally run the following algorithm after creating the new object:
If browsingContext's only entry in its session history is the
about:blank Document that was added when browsingContext
was created, and navigation is occurring
with replacement enabled, and that Document has the same
origin as the new Document, then do nothing.
Otherwise:
Call the JavaScript InitializeHostDefinedRealm() abstract operation with the following customizations:
For the global object, create a new Window object.
For the global this value, use browsingContext's
WindowProxy object.
Let realm execution context be the created JavaScript execution context.
Set up a window environment settings object with realm execution context and reservedEnvironment, if present.
Set the Document's HTTPS
state to the HTTPS state of
response.
Set the Document's referrer
policy to the result of parsing the
`Referrer-Policy` header of response. [REFERRERPOLICY]
Execute the Initialize a Document's CSP list
algorithm on the Document object and the response used to generate the document. [CSP]
If request is non-null, then set the document's referrer to the serialization of request's referrer, if request's referrer is a URL record, and the empty string otherwise.
Per the WHATWG Fetch standard a request's referrer will be either a URL record or
"no-referrer" at this point.
Implement the sandboxing for the Document.
Set the allow* flags for the Document.
If response has a `Refresh` header, then:
Let value be the value of the header with each byte mapped to a code point of equal value.
Run the shared declarative refresh steps with the Document
and value.
Otherwise, the document's type is such that the resource will not affect browsingContext, e.g., because the resource is to be handed to an external application or because it is an unknown type that will be processed as a download. Process the resource appropriately.
To process a navigate URL scheme, given a URL url and browsing context browsingContext, run these steps:
If url is to be handled using a mechanism that does not affect browsingContext, e.g., because url's scheme is handled externally, then proceed with that mechanism instead.
Otherwise, url is to be handled by displaying some sort of inline content, e.g., an error message because the specified scheme is not one of the supported protocols, or an inline prompt to allow the user to select a registered handler for the given scheme. Display the inline content.
In the case of a registered handler being used, navigate will be invoked with a new URL.
When a resource is handled by passing its URL or
data to an external software package separate from the user agent (e.g. handing a mailto: URL to a mail client, or a Word document to a word
processor), user agents should attempt to mitigate the risk that this is an attempt to exploit the
target software, e.g. by prompting the user to confirm that the source browsing
context's active document's origin is to be allowed to invoke the
specified software. In particular, if the navigate algorithm, when it was invoked,
was not triggered by user activation, the user agent should not invoke the external
software package without prior user confirmation.
For example, there could be a vulnerability in the target software's URL handler which a hostile page would attempt to exploit by tricking a user into clicking a link.
Some of the sections below, to which the above algorithm defers in certain cases, require the
user agent to update the session history with the new page. When a user agent is
required to do this, it must queue a task (associated with the Document
object of the current entry, not the new one) to run the following steps:
Unload the Document object of the
current entry, with the recycle parameter set to false.
If this instance of the navigation algorithm is canceled while this step is running the unload a document algorithm, then the unload a document algorithm must be allowed to run to completion, but this instance of the navigation algorithm must not run beyond this step. (In particular, for instance, the cancelation of this algorithm does not abort any event dispatch or script execution occurring as part of unloading the document or its descendants.)
Replace the Document of the entry being updated, and any other entries
that referenced the same document as that entry, with the new Document.
Traverse the history to the new entry.
Replace the current entry with a new entry representing the new resource
and its Document object, related state, and the default scroll restoration
mode of "auto".
Traverse the history to the new entry.
Remove all the entries in the browsing context's session history after the current entry. If the current entry is the last entry in the session history, then no entries are removed.
This doesn't necessarily have to affect the user agent's user interface.
Append a new entry at the end of the History object representing the new
resource and its Document object, related state, and the default scroll
restoration mode of "auto".
Traverse the history to the new entry. If the navigation was initiated with replacement enabled, then the traversal must itself be initiated with replacement enabled.
The navigation algorithm has now matured.
Fragment loop: Spin the event loop for a user-agent-defined amount of time, as desired by the user agent implementor. (This is intended to allow the user agent to optimize the user experience in the face of performance concerns.)
If the Document object has no parser, or its parser has stopped parsing, or the user agent has reason to believe the user is no longer
interested in scrolling to the fragment, then abort
these steps.
Scroll to the fragment given in the document's URL. If this fails to find an indicated part of the document, then return to the fragment loop step.
The task source for this task is the networking task source.
When an HTML document is to be loaded in a browsing context, the user agent must
queue a task to create a Document object, mark it as being an HTML document, set its content type to "text/html",
initialize the Document object, and finally create an HTML
parser and associate it with the Document. Each task that the networking task source places on the
task queue while fetching runs must then fill the parser's input byte
stream with the fetched bytes and cause the HTML parser to perform the
appropriate processing of the input stream.
The input byte stream converts bytes into characters for use in the tokenizer. This process relies, in part, on character encoding information found in the real Content-Type metadata of the resource; the computed type is not used for this purpose.
When no more bytes are available, the user agent must queue a task for the parser
to process the implied EOF character, which eventually causes a load event to be fired.
After creating the Document object, but before any script execution, certainly
before the parser stops, the user agent must update the
session history with the new page.
Application cache selection happens in the HTML parser.
The task source for the two tasks mentioned in this section must be the networking task source.
Spec bugs: 17976
When faced with displaying an XML file inline, user agents must follow the requirements defined
in the XML and Namespaces in XML recommendations, RFC 7303, DOM, and other relevant specifications
to create a Document object and a corresponding XML parser. [XML] [XMLNS] [RFC7303] [DOM]
At the time of writing, the XML specification community had not actually yet specified how XML and the DOM interact.
After the Document is created, the user agent must initialize the
Document object.
The actual HTTP headers and other metadata, not the headers as mutated or implied by the algorithms given in this specification, are the ones that must be used when determining the character encoding according to the rules given in the above specifications. Once the character encoding is established, the document's character encoding must be set to that character encoding.
If the document element, as parsed according to the XML specifications cited
above, is found to be an html element with an attribute manifest whose value is not the empty string, then, as soon as
the element is inserted into the document,
the user agent must parse the value of that attribute relative
to that element's node document, and if that is successful, must apply the URL serializer algorithm to the resulting URL
record with the exclude fragment flag set to obtain manifest URL, and
then run the application cache selection algorithm
with manifest URL as the manifest URL, passing in the newly-created
Document. Otherwise, if the attribute is absent, its value is the empty string, or
parsing its value fails, then as soon as the document element is inserted into the document, the user agent must run the application cache selection algorithm with no manifest, and
passing in the Document.
Because the processing of the manifest
attribute happens only once the document element is parsed, any URLs referenced by
processing instructions before the document element (such as <?xml-stylesheet?> PIs) will be fetched from the network and cannot be
cached.
User agents may examine the namespace of the root Element node of this
Document object to perform namespace-based dispatch to alternative processing tools,
e.g. determining that the content is actually a syndication feed and passing it to a feed handler.
If such processing is to take place, abort the steps in this section, and jump to the next step (labeled non-document content) in the
navigate steps above.
Otherwise, then, with the newly created Document, the user agent must update
the session history with the new page. User agents may do this before the complete document
has been parsed (thus achieving incremental rendering), and must do this before any scripts
are to be executed.
Error messages from the parse process (e.g. XML namespace well-formedness errors) may be
reported inline by mutating the Document.
When a plain text document is to be loaded in a browsing context, the user agent
must queue a task to create a Document object, mark it as being an HTML document, set its content type to the computed MIME type of the resource (type in the
navigate algorithm), initialize the Document object,
create an HTML parser, associate it with the Document, act as if the
tokenizer had emitted a start tag token with the tag name "pre" followed by a single U+000A LINE
FEED (LF) character, and switch the HTML parser's tokenizer to the PLAINTEXT
state. Each task that the networking task
source places on the task queue while fetching runs must then fill the
parser's input byte stream with the fetched bytes and cause the HTML
parser to perform the appropriate processing of the input stream.
The rules for how to convert the bytes of the plain text document into actual characters, and the rules for actually rendering the text to the user, are defined by the specifications for the computed MIME type of the resource (type in the navigate algorithm).
The document's character encoding must be set to the character encoding used to decode the document.
Upon creation of the Document object, the user agent must run the application cache selection algorithm with no manifest, and
passing in the newly-created Document.
When no more bytes are available, the user agent must queue a task for the parser
to process the implied EOF character, which eventually causes a load event to be fired.
After creating the Document object, but potentially before the page has finished
parsing, the user agent must update the session history with the new page.
User agents may add content to the head element of the Document,
e.g., linking to a style sheet, providing script, or giving the document a title.
In particular, if the user agent supports the Format=Flowed
feature of RFC 3676 then the user agent would need to apply extra styling to cause the text to
wrap correctly and to handle the quoting feature. This could be performed using, e.g., a CSS
extension.
The task source for the two tasks mentioned in this section must be the networking task source.
multipart/x-mixed-replace resourcesWhen a resource with the type multipart/x-mixed-replace is to be loaded in a
browsing context, the user agent must parse the resource using the rules for
multipart types. [RFC2046]
For each body part obtained from the resource, the user agent must run process a navigate
response using the new body part and the same browsing context, with
replacement enabled if a previous body part from the same resource resulted in a
Document object being created and initialized, and otherwise using the same setup as the navigate
attempt that caused this section to be invoked in the first place.
For the purposes of algorithms processing these body parts as if they were complete stand-alone resources, the user agent must act as if there were no more bytes for those resources whenever the boundary following the body part is reached.
Thus, load events (and for that matter unload events) do fire for each body part loaded.
When an image, video, or audio resource is to be loaded in a browsing context, the
user agent should create a Document object, mark it as being an HTML document, set its content
type to the computed MIME type of the
resource (type in the navigate algorithm), initialize the
Document object, append an html element to the
Document, append a head element and a body element to the
html element, append an element host element for the media, as described
below, to the body element, and set the appropriate attribute of the element
host element, as described below, to the address of the image, video, or audio
resource.
The element host element to create for the media is the element given in the table below in the second cell of the row whose first cell describes the media. The appropriate attribute to set is the one given by the third cell in that same row.
| Type of media | Element for the media | Appropriate attribute |
|---|---|---|
| Image | img
| src
|
| Video | video
| src
|
| Audio | audio
| src
|
Then, the user agent must act as if it had stopped parsing.
Upon creation of the Document object, the user agent must run the application cache selection algorithm with no manifest, and
passing in the newly-created Document.
After creating the Document object, but potentially before the page has finished
fully loading, the user agent must update the session history with the new page.
User agents may add content to the head element of the Document, or
attributes to the element host element, e.g., to link to a style sheet, to provide a
script, to give the document a title, or to make the media autoplay.
When a resource that requires an external resource to be rendered is to be loaded in a
browsing context, the user agent should create a Document object, mark
it as being an HTML document and mark it as being a
plugin document, set its content
type to the computed MIME type of the
resource (type in the navigate algorithm), initialize the
Document object, append an html element to the
Document, append a head element and a body element to the
html element, append an embed to the body element, and
set the src attribute of the embed element to
the address of the resource.
The term plugin document is used by
Content Security Policy as part of the mechanism that ensures iframes
can't be used to evade plugin-types directives. [CSP]
Then, the user agent must act as if it had stopped parsing.
Upon creation of the Document object, the user agent must run the application cache selection algorithm with no manifest, and
passing in the newly-created Document.
After creating the Document object, but potentially before the page has finished
fully loading, the user agent must update the session history with the new page.
User agents may add content to the head element of the Document, or
attributes to the embed element, e.g. to link to a style sheet or to give the
document a title.
When the user agent is to display a user agent page inline in a browsing context,
the user agent should create a Document object, mark it as being an HTML document, set its content type to "text/html",
initialize the Document object, and then either associate that
Document with a custom rendering that is not rendered using the normal
Document rendering rules, or mutate that Document until it represents
the content the user agent wants to render.
Once the page has been set up, the user agent must act as if it had stopped parsing.
Upon creation of the Document object, the user agent must run the application cache selection algorithm with no manifest,
passing in the newly-created Document.
After creating the Document object, but potentially before the page has been
completely set up, the user agent must update the session history with the new
page.
When a user agent is supposed to navigate to a fragment, optionally with replacement enabled, then the user agent must run the following steps:
If not with replacement enabled, then remove all the entries in the browsing context's session history after the current entry. If the current entry is the last entry in the session history, then no entries are removed.
This doesn't necessarily have to affect the user agent's user interface.
Remove any tasks queued by the history traversal
task source that are associated with any Document objects in the
top-level browsing context's document family.
Append a new entry at the end of the History object representing the new
resource and its Document object, related state, and current entry's
scroll restoration mode. Its URL must be set to the address to which
the user agent was navigating. The title must be left
unset.
Traverse the history to the new entry, with replacement enabled if this was invoked with replacement enabled, and with the non-blocking events flag set. This will scroll to the fragment given in what is now the document's URL.
If the scrolling fails because the relevant ID has not yet been parsed, then the original navigation algorithm will take care of the scrolling instead, as the last few steps of its update the session history with the new page algorithm.
When the user agent is required to scroll to the fragment and the indicated part of the document, if any, is being rendered, the user agent must either change the scrolling position of the document using the following algorithm, or perform some other action such that the indicated part of the document is brought to the user's attention. If there is no indicated part, or if the indicated part is not being rendered, then the user agent must do nothing. The aforementioned algorithm is as follows:
If there is no indicated part of the
document, set the Document's target element to null.
If the indicated part of the document is the top of the document, then:
Set the Document's target element to null.
Scroll to the beginning of the document for the Document. [CSSOMVIEW]
Otherwise:
Let target be element that is the indicated part of the document.
Set the Document's target element to
target.
Use the scroll an element into view algorithm to scroll target into view, with the align to top flag set. [CSSOMVIEW]
Run the focusing steps for target, with the
Document's viewport as the fallback target.
Move the sequential focus navigation starting point to target.
The indicated part of the document is the one that the fragment, if any, identifies. The semantics of the fragment in terms of mapping it to a node is defined by the
specification that defines the MIME type used by the Document (for
example, the processing of fragments for XML MIME types is the responsibility of RFC7303). [RFC7303]
There is also a target element for each Document, which is used in
defining the :target pseudo-class and is updated by the
above algorithm. It is initially null.
For HTML documents (and HTML MIME types), the following processing model must be followed to determine what the indicated part of the document is.
If fragment is the empty string, then the indicated part of the document is the top of the document; return.
If find a potential indicated element with fragment returns non-null, than the return value is the indicated part of the document; return.
Let fragmentBytes be the result of percent-decoding fragment.
Let decodedFragment be the result of running UTF-8 decode without BOM or fail on fragmentBytes.
If find a potential indicated element with decodedFragment returns non-null, than the return value is the indicated part of the document; return.
If decodedFragment is an ASCII case-insensitive match for the
string top, then the indicated part of the document is the
top of the document; return.
There is no indicated part of the document.
To find a potential indicated element given a string fragment, run these steps:
If there is an element in the document tree that has an ID equal to fragment, then return the first such element in tree order.
If there is an a element in the document
tree that has a name attribute whose value is equal to
fragment, then return the first such element in tree order.
Return null.
The task source for the task mentioned in this section must be the DOM manipulation task source.
When a user agent is required to traverse the history to a session history entry entry, optionally with replacement enabled, and optionally with the non-blocking events flag set, the user agent must act as follows.
This algorithm is not just invoked when explicitly going back or forwards in the session history — it is also invoked in other situations, for example when navigating a browsing context, as part of updating the session history with the new page.
If entry no longer holds a Document object, then
navigate the browsing
context to entry's URL to perform an entry update of
entry, and abort these steps. The "navigate" algorithm reinvokes this
"traverse" algorithm to complete the traversal, at which point there is a
Document object and so this step gets skipped. The navigation must be done using
the same source browsing context as was used the first time entry was
created. (This can never happen with replacement enabled.)
If the resource was obtained using a non-idempotent action, for example a POST form submission, or if the resource is no longer available, for example because the computer is now offline and the page wasn't cached, navigating to it again might not be possible. In this case, the navigation will result in a different page than previously; for example, it might be an error message explaining the problem or offering to resubmit the form.
If the current entry's title was not set by the pushState() or replaceState() methods, then set its title to the value
returned by the document.title IDL attribute.
If appropriate, update the current entry in the browsing
context's Document object's History object to reflect any state
that the user agent wishes to persist. The entry is then said to be an entry with persisted
user state.
If entry has a different Document object than the current
entry, then run the following substeps:
Remove any tasks queued by the history traversal
task source that are associated with any Document objects in the
top-level browsing context's document family.
If the origin of entry's Document object is not the
same as the origin of the current
entry's Document object, then run the following subsubsteps:
The current browsing context name must be stored with all the entries in
the history that are associated with Document objects with the same
origin as the active document and that are contiguous with the
current entry.
If the browsing context is a top-level browsing context, but not an auxiliary browsing context, then set the browsing context's name to the empty string.
Set the active document of the browsing
context to entry's Document object.
If entry has a browsing context name, then run the following subsubsteps:
Set the browsing context's browsing context name to entry's browsing context name.
Clear any browsing context names of all
entries in the history that are associated with Document objects with the
same origin as the new active document and that are contiguous with
entry.
If entry's Document object has any
form controls whose autofill field name is "off", invoke the reset algorithm of each of those elements.
If the current document readiness of entry's Document
object is "complete", then queue a task to run the
following subsubsteps:
If the Document's page showing flag is true, then abort this
task (i.e. don't fire the event below).
Set the Document's page showing flag to true.
Run any session history document visibility change steps for Document that
are defined by other applicable specifications.
This is specifically intended for use by the Page Visibility specification. [PAGEVIS]
Fire an event named pageshow at the Document object's
Window object, using PageTransitionEvent, with the persisted attribute initialized to true,
and legacy target override flag set.
If entry has a URL whose fragment differs from that of the
current entry's when compared in a case-sensitive manner, and the two
share the same Document object, then let hash changed be true, and let
old URL be the current entry's URL and new URL be
entry's URL. Otherwise, let hash changed be false.
If the traversal was initiated with replacement enabled, remove the entry immediately before the specified entry in the session history.
If entry is not an entry with persisted user state, but its URL's fragment is non-null, then scroll to the fragment.
Set the current entry to entry.
Let targetRealm be the current Realm Record.
If entry has serialized state, then let state be StructuredDeserialize(entry's serialized state, targetRealm). If this throws an exception, catch it, ignore the exception, and let statebe null.
Otherwise, let state be null.
Set history.state to state.
Let state changed be true if entry's Document object
has a latest entry, and that entry is not entry; otherwise let it be
false.
Set entry's Document object's latest entry to
entry.
If the non-blocking events flag is not set, then run the following substeps immediately. Otherwise, the non-blocking events flag is set; queue a task to run the following substeps instead.
If state changed is true, then fire an
event named popstate at the Document
object's Window object, using PopStateEvent, with the bubbles attribute initialized to true and the state attribute initialized state.
If entry is an entry with persisted user state, then the user agent may restore persisted user state and update aspects of the document and its rendering.
If hash changed is true, then fire an
event named hashchange at the browsing
context's Window object, using HashChangeEvent, with the bubbles attribute initialized to true, the oldURL attribute initialized to old URL,
and the newURL attribute initialized to
new URL.
The task source for the tasks mentioned above is the DOM manipulation task source.
When the user agent is to restore persisted user state from a history entry, it must run the following steps immediately:
If the entry has a scroll restoration mode, let scrollRestoration
be that. Otherwise let scrollRestoration be "auto"
If scrollRestoration is "manual" the user agent should not restore the scroll
position for the Document or any of its scrollable regions, with the exception of
any nested browsing contexts whose scroll restoration is controlled by their own history entry's
scroll restoration mode, otherwise, it may do so.
Optionally, update other aspects of the document and its rendering, for instance values of form fields, that the user agent had previously recorded.
This can even include updating the dir attribute
of textarea elements or input elements whose type attribute is in either the Text state or the Search state, if the persisted state includes the
directionality of user input in such controls.
Not restoring the scroll position by user agent does not imply that the scroll position will be left at any particular value (e.g., (0,0)). The actual scroll position depends on the navigation type and the user agent's particular caching strategy. So web applications cannot assume any particular scroll position but rather are urged to set it to what they want it to be.
PopStateEvent interface[Exposed=Window,
Constructor(DOMString type, optional PopStateEventInit eventInitDict)]
interface PopStateEvent : Event {
readonly attribute any state;
};
dictionary PopStateEventInit : EventInit {
any state = null;
};
stateReturns a copy of the information that was provided to pushState() or replaceState().
The state attribute must return the
value it was initialized to. It represents the context information for the event, or null, if the
state represented is the initial state of the Document.
HashChangeEvent interfaceSupport: hashchangeChrome for Android 59+Chrome 5+iOS Safari 4.0+UC Browser for Android 11.4+Firefox 3.6+IE 8+Samsung Internet 4+Opera Mini NoneSafari 5+Android Browser 2.2+Opera 10.6+Edge 12+
Source: caniuse.com
[Exposed=Window,
Constructor(DOMString type, optional HashChangeEventInit eventInitDict)]
interface HashChangeEvent : Event {
readonly attribute USVString oldURL;
readonly attribute USVString newURL;
};
dictionary HashChangeEventInit : EventInit {
USVString oldURL = "";
USVString newURL = "";
};
oldURLReturns the URL of the session history entry that was previously current.
newURLReturns the URL of the session history entry that is now current.
The oldURL attribute must return
the value it was initialized to. It represents context information for the event, specifically the
URL of the session history entry that was traversed from.
The newURL attribute must return
the value it was initialized to. It represents context information for the event, specifically the
URL of the session history entry that was traversed to.
PageTransitionEvent interface[Exposed=Window,
Constructor(DOMString type, optional PageTransitionEventInit eventInitDict)]
interface PageTransitionEvent : Event {
readonly attribute boolean persisted;
};
dictionary PageTransitionEventInit : EventInit {
boolean persisted = false;
};
persistedFor the pageshow event, returns false if the page is
newly being loaded (and the load event will fire). Otherwise,
returns true.
For the pagehide event, returns false if the page is
going away for the last time. Otherwise, returns true, meaning that (if nothing conspires to
make the page unsalvageable) the page might be reused if the user navigates back to this
page.
Things that can cause the page to be unsalvageable include:
document.open()
beforeunload events
unload events
iframes that are not salvageable
WebSocket objects
Document
The persisted attribute must
return the value it was initialized to. It represents the context information for the event.
A Document has a salvageable state, which must initially be
true, a fired unload flag, which must initially be false, and a page showing
flag, which must initially be false. The page showing flag is used to ensure that
scripts receive pageshow and pagehide events in a consistent manner (e.g. that they never
receive two pagehide events in a row without an intervening
pageshow, or vice versa).
Event loops have a termination nesting level counter, which must initially be 0.
To prompt to unload, given a Document
object document and optionally a recursiveFlag, run these steps:
Increase the event loop's termination nesting level by 1.
Increase the document's ignore-opens-during-unload counter by 1.
Let event be the result of creating an event using
BeforeUnloadEvent.
Initialize event's type attribute to beforeunload and its cancelable attribute true.
Decrease the event loop's termination nesting level by 1.
If any event listeners were triggered by the earlier dispatch step, then set document's salvageable state to false.
If document's active sandboxing flag set does not have its
sandboxed modals flag set, and the returnValue attribute of the event
object is not the empty string, or if the event was canceled, then the user agent may ask the
user to confirm that they wish to unload the document.
The message shown to the user is not customizable, but instead determined by
the user agent. In particular, the actual value of the returnValue attribute is ignored.
The user agent is encouraged to avoid asking the user for confirmation if it judges that doing so would be annoying, deceptive, or pointless. A simple heuristic might be that if the user has not interacted with the document, the user agent would not ask for confirmation before unloading it.
If the user agent asks the user for confirmation, it must pause while waiting for the user's response.
If the user did not confirm the page navigation, then the user agent refused to allow the document to be unloaded.
If the recursiveFlag is not set, then:
Let descendants be the list of the descendant browsing contexts of document.
For each browsingContext in descendants:
Prompt to unload browsingContext's active document with the recursiveFlag set. If the user refused to allow the document to be unloaded, then the user implicitly also refused to allow document to be unloaded; break.
If the salvageable state of browsingContext's active document is false, then set the salvageable state of document to false.
Decrease the document's ignore-opens-during-unload counter by 1.
When a user agent is to unload a document, it must run the following
steps. These steps are passed an argument, recycle, which is either true or false,
indicating whether the Document object is going to be re-used. (This is set by the
document.open() method.)
Increase the event loop's termination nesting level by one.
Increase the Document's ignore-opens-during-unload counter by
one.
If the Document's page showing flag is false, then jump to the
step labeled unload event below (i.e. skip firing the pagehide event and don't rerun the unloading document
visibility change steps).
Set the Document's page showing flag to false.
Fire an event named pagehide at the Document object's Window
object, using PageTransitionEvent, with the persisted attribute initialized to true if the
Document object's salvageable state is
true, and false otherwise, and legacy target override flag set.
Run any unloading document visibility change steps for Document that
are defined by other applicable specifications.
This is specifically intended for use by the Page Visibility specification. [PAGEVIS]
Unload event: If the Document's fired unload flag is
false, then fire an event named unload at the Document's object Window
object, with legacy target override flag set.
Decrease the event loop's termination nesting level by one.
If any event listeners were triggered by the earlier unload event step, then set
the Document object's salvageable state
to false and set the Document's fired unload flag to true.
Run any unloading document cleanup steps for Document that are
defined by this specification and other applicable specifications.
If this algorithm was invoked by another instance of the "unload a document" algorithm (i.e. by the steps below that invoke this algorithm for all descendant browsing contexts), then jump to the step labeled end.
Let descendants be the list of the descendant browsing
contexts of the Document.
If descendants is not an empty list, then for each browsing context b in descendants run the following substeps:
Unload the active document of the browsing context b with the recycle parameter set to false.
If the salvageable state of the active document of the browsing context b is false, then set the salvageable state of this document to false also.
If both the Document's salvageable state and recycle are
false, then the Document's browsing
context must discard the
Document.
End: Decrease the Document's ignore-opens-during-unload
counter by one.
This specification defines the following unloading document cleanup steps. Other specifications can define more.
For each WebSocket object webSocket whose relevant global object is equal to window,
make disappear webSocket.
If this affected any WebSocket objects, then set the Document's salvageable state to false.
If the Document's salvageable
state is false, run the following substeps:
For each EventSource object eventSource whose relevant global object is equal to window,
forcibly close
eventSource.
Empty window's list of active timers.
BeforeUnloadEvent interface[Exposed=Window]
interface BeforeUnloadEvent : Event {
attribute DOMString returnValue;
};
There are no BeforeUnloadEvent-specific initialization methods.
The BeforeUnloadEvent interface is a legacy interface which allows prompting to unload to be controlled not only by canceling the
event, but by setting the returnValue
attribute to a value besides the empty string. Authors should use the preventDefault() method, or other means of canceling
events, instead of using returnValue.
The returnValue attribute
controls the process of prompting to unload. When the event
is created, the attribute must be set to the empty string. On getting, it must return the last
value it was set to. On setting, the attribute must be set to the new value.
This attribute is a DOMString only for historical reasons.
Any value besides the empty string will be treated as a request to ask the user for
confirmation.
If a Document is aborted, the user agent must
run the following steps:
Abort the active
documents of every child browsing context. If this results in any of those
Document objects having their salvageable state set to false, then set this
Document's salvageable state to false
also.
Cancel any instances of the fetch algorithm in the
context of this Document, discarding any tasks
queued for them, and discarding any further data received from
the network for them. If this resulted in any instances of the fetch algorithm being canceled or any queued tasks or any network data getting
discarded, then set the Document's salvageable state to false.
If the Document has an active parser, then abort that parser and set the Document's salvageable state to false.
User agents may allow users to explicitly invoke the abort a
document algorithm for a Document. If the user does so, then, if that
Document is an active document, the user agent should queue a
task to fire an event named abort at that Document's Window object
before invoking the abort algorithm.